2JTP1.6×0.9p winder for mines
2JTP type mining lift winch
The number of wire rope winding layers on the reel shall meet the following requirements:1, of well lifting personnel or the movements of personnel and material of winding 1 layer; designed for lifting material of winding 2 layer;
Product features, main applications and scope of application:This product is suitable for lifting coal, materials, lifting personnel and allocating materials and equipment in the shaft or inclined shaft of coal mine, and can also be used for other traction transportation.
Working principle:When starting the main motor, the rotor of the motor transmits the power to the high-speed axis of the reducer through the elastic coupling, and then transmits the power to the principal axis device through the driving and slowing down of the reducer through the gear coupling, if the steering of the motor is constantly changed, the reel can be twined or the steel wire rope can be loosened, so that the lifting container can make the periodic movement of up and down in the wellbore.
Representation of product model:The model representation method of lifting winch should accord with the provisions of MT/T 154.8-1996.
The diameter of the reel is 1.2 m, and the width is 1.2 m. The product model of the single reel disc sluice mining lifting winch which adopts non-explosion resistance speed control is: JTP-1.2 × 1.2.
The diameter of the reel is 1.6 m, and the width is 1.2 m. The product model of the single reel disc sluice mining lifting winch adopting non-explosion-proof frequency conversion speed control is: JTP-1.6 × 1.2 P.
| Model |
2JTP-1.6×0.9P |
| Reel |
Number |
2 |
| Diameter(m) |
1.6 |
| Width(m) |
0.8 |
| Center distance of two reels(m) |
0.97 |
| Maximum static tension of steel wire rope |
Manned(KN) |
31 |
| Zai Wu(KN) |
42 |
| Maximum static tension difference of steel wire rope |
Manned(KN) |
30 |
| Zai Wu(KN) |
30 |
| Maximum lifting height or transport length |
A layer of winding(m) |
182 |
| Two-layer winding(m) |
367 |
| Three-layer winding(m) |
576 |
| Wire rope |
Maximum diameter(mm) |
20 |
| Sum of breaking tension(KN) |
279 |
| Reduction ratio |
31.5 |
| Average lifting speed (m/s) |
4.0 |
| Motor |
Speed((r/min) |
985 |
| Maximum power(KW) |
110 |
| Outline dimension length x width x height |
5950×3000×2300 |
| Theoretical weight of main engine(kg) |
16919 |
First, the lowest value of wire rope safety factor meets the following requirements:1,9 times for lifting personnel; 2.Lifting personnel and materials (9 times for lifting personnel, 9 times for mixed lifting, 7.5 times for lifting materials ); 3,designed for lifting materials 6.5 times.
Second, the ratio of the diameter of the drum and the diameter of the wire rope of the mine hoist should not be less than 80 times; the ratio of the diameter of the drum and the diameter of the wire rope of the mine hoist should not be less than 60 times.
The number of wire rope winding layers on the reel shall meet the following requirements:1, of well lifting personnel or the movements of personnel and material of winding 1 layer; designed for lifting material of winding 2 layer;2. Winding 2 layers of lifting personnel and materials in inclined shaft; designed for winding 3 layers of lifting materialsWinding 2 layers of lifting personnel and materials during well construction.
Your message must be between 20-3,000 characters!
